I'd actually do a parrallel/serial setup.
Have a Y, one end going to the CPU, the other going to the gpu + nb which are in series. then to another Y. This way there is two blocks in one loop, and one in the other loop. Logically much more water will go through the cpu loop, which is exactly what we want.
__________________
2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans
2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water
|