Pro/Forums - View Single Post

Brad · 05-30-2002, 06:09 AM

you can set it to 100:133 ratio, which can run at any fsb. so at 133 you can have 177mhz memory speed. The other option is 100:100

If you fix pci, it will fix pci speed at 33mhz. But in most cases this leads to poor performance, you're better to choose your pci cards carefully and run at /4 divider if possible. Look for pci cards with the second notch in them at the front, for 66mhz operation. even at 48mhz pci speed, they'll hardly be pushed

05-30-2002, 06:09 AM	#2
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	you can set it to 100:133 ratio, which can run at any fsb. so at 133 you can have 177mhz memory speed. The other option is 100:100 If you fix pci, it will fix pci speed at 33mhz. But in most cases this leads to poor performance, you're better to choose your pci cards carefully and run at /4 divider if possible. Look for pci cards with the second notch in them at the front, for 66mhz operation. even at 48mhz pci speed, they'll hardly be pushed __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water