Pro/Forums - View Single Post

Cieprus · 05-31-2002, 07:23 AM

Here is some mor info.

I have a 6 pass tranny cooler, AND another 4 pass...The 4 pass is not hooked up.

fans are 12v of course.

Umm the tranny rad has 3/8 fittings, But I could cut them down, and then they will be 1/2.

No Im not using the BI Pro, Its damaged and Im trying to fix it. Ill try it later if it works. (Long story)

I was using water wetter with my water, Ya my readings were probally off. They must be around 31-32 water and ambiant. Ambiant being lower.

05-31-2002, 07:23 AM	#15
Cieprus Cooling Savant Join Date: May 2002 Location: ~America~ Posts: 180	Here is some mor info. I have a 6 pass tranny cooler, AND another 4 pass...The 4 pass is not hooked up. fans are 12v of course. Umm the tranny rad has 3/8 fittings, But I could cut them down, and then they will be 1/2. No Im not using the BI Pro, Its damaged and Im trying to fix it. Ill try it later if it works. (Long story) I was using water wetter with my water, Ya my readings were probally off. They must be around 31-32 water and ambiant. Ambiant being lower.