Make sure that you have your burner set up correctly on the IDE bus as well.
You may even need to download the updated ASPI drivers.
Adaptec should have them located on their web site somewhere...
Also try CloneCD, it SHOULD see the drive no mater what.
__________________
Athlon64 X2 4200+ @ 2.5Ghz (250FSB x 10)
OCZ VX 1GB 4000 @ 250FSB (6-2-2-2 timmings)
DFI LANParty nForce4 Ultra-D
SCSI Raid 5 x (3) Cheetah 15K HDDs
LSI Express 500 (128MB cache)
OCZ PowerStream 520W PSU
ATI X850XT PE (Stock)
DTEK WhiteWater + DTEK Custom Radiator
Eheim 1250
|