or you could modify the BI2 itself. Instead of having water enter through a 3/8" barb and go down, then up then down then up and exit through another 3/8" barb you could instead put a 1/2" barb in the centre of it. So the water would enter the 1/2" barb, split up, go down then back up, and exit through the two 3/8" barbs. It'll give you much better flow rates, and more cooling capacity
__________________
2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans
2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water
|