I'm replying to mkosem's request for info about the Unablock. The system specs are:
1GHz(266) Tbird Axia @ 1.75v
Epox 8kta3 motherboard
Unablock(lapped to a mirror finish)
Aqua Via 1300
Ford Escort heatercore
1/2" tubing except for inlet to the waterblock
120mm Panflo 1LA pulling air through the heatercore
1 80mm PC Power & Cooling Silencer in powersupply
open slots between pci cards
The entire system is inside a 16"x16"x7" mid-tower case
The results:
1GHz(7.5 x 133)
Ambient temp 25C , cpu(idle) 34C , cpu(load) 37C
1.33GHz(10 x 133) @ 1.85v
Ambient temp 25C , cpu(idle) 37C, cpu(load) 40C
The cpu temp was taken off the mboard sensor, this is my first attempt at watercooling and the data is not exact, but I thought it might give someone a rough idea how the Unablock performs. Sorry for the long post but a certain amout of info is needed to describe the test conditions. Any comments good or bad is most welcome. Gary
|