Quote:
Originally posted by VIPERMAN
I just test fitted the hoses to the blocks and Chazz you where right. The upper radiator needed to be turn over, because out of the reservoir to the upper rad it would kink anyway I tried. Now it goes straight in with about 10" of tubing.
Yes I do know the flow of the Spir@l block. It flowed a gallon of water in 14 seconds. Thats about 257gph.
Just wanted to say you guys rock.
|
Actually, I'm the one that suggested turning the top rad upside down, but you're welcome
I'd leave the blocks in series, but I'd feed the CPU block first. Alternatively, you could run the blocks in parallel too, and clamp down the feed to the GPU, so that the CPU block gets more flow, because it needs it more than the GPU, and because it's more restrictive, so you have to compensate for that that way.