Pro/Forums - View Single Post

jtroutma · 06-21-2002, 01:45 PM

I had an idea on making a pelt chiller......

Take a pipe and cut a section out of the side. Fit an old PII heatsink into the hole and seal the sides. Put 2 or more 156W pelts on the back of the PII heatsink and cool the pelts with a PII waterblock. The water will come in from the top of the tube, sit in there for a while and get chilled by the pelt cooled PII heatsink and then go off to the water block. The other block cooling the hot side of the pelts can be run in a separate water line that is cooled by a radiator.

It was an idea....

06-21-2002, 01:45 PM	#2
jtroutma Cooling Savant Join Date: Aug 2001 Location: SLO, CA Posts: 837	I had an idea on making a pelt chiller...... Take a pipe and cut a section out of the side. Fit an old PII heatsink into the hole and seal the sides. Put 2 or more 156W pelts on the back of the PII heatsink and cool the pelts with a PII waterblock. The water will come in from the top of the tube, sit in there for a while and get chilled by the pelt cooled PII heatsink and then go off to the water block. The other block cooling the hot side of the pelts can be run in a separate water line that is cooled by a radiator. It was an idea.... __________________ Athlon64 X2 4200+ @ 2.5Ghz (250FSB x 10) OCZ VX 1GB 4000 @ 250FSB (6-2-2-2 timmings) DFI LANParty nForce4 Ultra-D SCSI Raid 5 x (3) Cheetah 15K HDDs LSI Express 500 (128MB cache) OCZ PowerStream 520W PSU ATI X850XT PE (Stock) DTEK WhiteWater + DTEK Custom Radiator Eheim 1250