Pro/Forums - View Single Post

ColdFlare · 07-03-2002, 10:31 PM

Hello, I am looking for some comparisions of watercooling temperatures. I'm Running a KX7333-Raid motherboard and using the probe underneath the socket to record temperatures. I'll appreciate it if you KX7333 or older ABIT boards can post your temperatures with your water cooling.

I'm Currently running at default speed 1800+ @ 1.53ghz. Prime95 full load at 43c and system temp at 34c. My chip idles at 39c. Swiftech MC462 with Delta EHE at 7v.

I want to know if water cooling will lower my temps dramatically. I dont want to spend 100 dollars to setup a watercooler and get 1-5c drop in temps only.

Here are my complete specs:

AMD @ 1.53ghz : Idle 39c Full: 43C
System Temp: 34c
Voltage : 1.75v
Ambient Temp: 26c
Temp outdoor: 37c
Using AS3 been setteled for a while.

Could you guys post your watercooling parts, speed, voltage along with your ABIT model and temperatures?

My watercooling adventures are in your hands. I really want to set it up, but I dont want to get bad results. Thanks.

07-03-2002, 10:31 PM	#1
ColdFlare Cooling Neophyte Join Date: May 2002 Location: New York City Posts: 42	My Watercooling future is in your hands! Hello, I am looking for some comparisions of watercooling temperatures. I'm Running a KX7333-Raid motherboard and using the probe underneath the socket to record temperatures. I'll appreciate it if you KX7333 or older ABIT boards can post your temperatures with your water cooling. I'm Currently running at default speed 1800+ @ 1.53ghz. Prime95 full load at 43c and system temp at 34c. My chip idles at 39c. Swiftech MC462 with Delta EHE at 7v. I want to know if water cooling will lower my temps dramatically. I dont want to spend 100 dollars to setup a watercooler and get 1-5c drop in temps only. Here are my complete specs: AMD @ 1.53ghz : Idle 39c Full: 43C System Temp: 34c Voltage : 1.75v Ambient Temp: 26c Temp outdoor: 37c Using AS3 been setteled for a while. Could you guys post your watercooling parts, speed, voltage along with your ABIT model and temperatures? My watercooling adventures are in your hands. I really want to set it up, but I dont want to get bad results. Thanks.