Pro/Forums - View Single Post

Hallis · 07-04-2002, 03:46 AM

+1 on Cyco also. good idea, (this being the fan on the back of the case i am assuming) you could even mount a BI Xtreme on the outside of the 120mm space.. and likewisw the fan on the outside,, this would give enough case clearence to that the barbs on the BI face inward so you can drill 2 holes on your case and run the tubes right in instead of having to try to curve them around. you can mount a pump-res in many different spaces so that wouldnt be a problem. and most blocks you get will be roughly the same height, like DangerDen, D-tek, and Swiftech. if you put the rad on the outside then space even in a mini-tower isnt a concern.

07-04-2002, 03:46 AM	#5
Hallis Cooling Savant Join Date: Oct 2001 Location: Dallas, Tx Posts: 469	+1 on Cyco also. good idea, (this being the fan on the back of the case i am assuming) you could even mount a BI Xtreme on the outside of the 120mm space.. and likewisw the fan on the outside,, this would give enough case clearence to that the barbs on the BI face inward so you can drill 2 holes on your case and run the tubes right in instead of having to try to curve them around. you can mount a pump-res in many different spaces so that wouldnt be a problem. and most blocks you get will be roughly the same height, like DangerDen, D-tek, and Swiftech. if you put the rad on the outside then space even in a mini-tower isnt a concern.