Quote:
Originally posted by Output:
I just completed my dual Black Ice mod. I was not happy with a single BI but I do love the size. Now I figured that since the BI extreme is so good and it looks like a black ice, just wider. So why not put 2 normal BI facing each other and place a T joining the intakes from both, I did the same with the outtake as well. This would double the flow in the water block, since the BI's are running in parallel. Ok, so here are the results:
before:
42c cpu and after 36c.
This is running prime 95 for 2 hours and a room temp of 23c.
I did not move the block between tests.
I guess that the block really likes the higher flow!
Here is my system:
AMD 1100@1302, 2.05vcore.
maze II upgrade
abit kt7a ver 1.0
1/2 ID and 5/8 ID silicone hose
Ehiem 1250 pump
2x pabst 120mm, 55 cfm
Here are some pics:
Pic 1
Pic 2
Pic 3
Pic 4
Pic 5
[ 12-01-2001: Message edited by: Output ]
|
A nice mod,& very nice work but a bit over complex for the result. A simpler way to acheive the same result and save space at the same time:
Dual BI Mod