Pro/Forums - View Single Post - Balance between backpressure and WB flow speed?

awesterink · 07-17-2002, 10:38 AM

I am currently back at aircooling, but MBM reported 44C/45C idle, 49C/46C load. This was with the standard 8mm ID tubing and fittings, and the Maxxxpert 120mm rad using a Panaflow L1A intake at 7V.

The ambient sensor is probably somehere near the NB to report that high (Gigabyte 7VRXP). Plus my case sits in a cabinet, so the hot air exhausted from the back (120mm Panaflow L1A at 7V) gets trapped a little, making the ambient around the case higher than intake ambient.

07-17-2002, 10:38 AM	#11
awesterink Cooling Neophyte Join Date: Jul 2002 Location: Grand Rapids, MI Posts: 53	I am currently back at aircooling, but MBM reported 44C/45C idle, 49C/46C load. This was with the standard 8mm ID tubing and fittings, and the Maxxxpert 120mm rad using a Panaflow L1A intake at 7V. The ambient sensor is probably somehere near the NB to report that high (Gigabyte 7VRXP). Plus my case sits in a cabinet, so the hot air exhausted from the back (120mm Panaflow L1A at 7V) gets trapped a little, making the ambient around the case higher than intake ambient.