[DoTheDog]

Surefoot,
Thanks for the reply. I do have a couple of 90 degree turns. 1 coming right out of the pump, the blackice rad connectors go straight into a plenum chamber, with 3 passes through, from there it is a straight shot to the DD Maze 2, out of the Maze 2 I have another 90 degree elbow to return it back to the pump. No sharp turns or kinks.

Water height is the pump at the bottom of the case and up to the water block (about 14 inches?) or the width of the Mobo.

I will try re-applying the ASII. I think I had too much on before but I removed most of it and spread it thinner. I may be able to get it a little thinner still. I will give it a shot after I take the water cooling system out.