That would give me 11.44V/18.1A on the peltier, at 75.3% capacity, btw. I think that would be managable on the PSU (in my lay opinion, heh). Also under consideration is to put a high wattage potentiometer on the card and slip that whole assembly in a drive bay on the front of my box with the dial sticking out. That would allow me to up the resistance (lower the pelt power) during the winter when I don't need -20C temps (it gets 10-15F here on a regular basis for a few months per year) and want to save electricity. If all this works, I just have to figure out a way to waterproof my socket. With my current block, that might be a biznatch.
|