Well, I agree, the blocks in series is very simple, and the pump is sufficient, but...
You could use T type fitting to feed the NB wb, in parallel. Even more, add a valve to the NB WB loop. Here's why:
The NB WB doesn't generate anywhere near as much heat as the CPU does, so you'd want a relatively proportional amount of flow. The advantage of course, is that the CPU WB gets most of the flow, and that's what you really want.
Alternatively, run the WBs in parallel, but feed the NB WB with 1/4 ID tubing, from a T fitting (instead of a valve).
and that's my $.02 !
|