Pro/Forums - View Single Post - I have just about had it with my cooling setups !

Dr_Pentium · 07-24-2002, 01:53 PM

k will try all those suggestions. initailly i was using tap water when i was test running the system, but sine then i use distilled water with water wetter. Is there any liquid that will clean off the residue ?

My case is not restricting any air flow the rad is mounted in the front and i have a 120mm blow hole placed there. I was not using a shroud, but my fan was about 1 inch away from the rad. Any links to creating a shroud? much appreciated

Should i replace all my tubing aswell ? Or is it safe to keep.

the pump is not directly under the res, but it seems close enough, most of the water is being fed to the pump due to gravity. i will reposition the whole thing and come back with some results later tonite.

Thanks for all the info guys. if it still gives probs, i will post real pics of the setup, maybe that will help more.

07-24-2002, 01:53 PM	#20
Dr_Pentium Cooling Neophyte Join Date: Jun 2002 Location: toronto Posts: 24	k will try all those suggestions. initailly i was using tap water when i was test running the system, but sine then i use distilled water with water wetter. Is there any liquid that will clean off the residue ? My case is not restricting any air flow the rad is mounted in the front and i have a 120mm blow hole placed there. I was not using a shroud, but my fan was about 1 inch away from the rad. Any links to creating a shroud? much appreciated Should i replace all my tubing aswell ? Or is it safe to keep. the pump is not directly under the res, but it seems close enough, most of the water is being fed to the pump due to gravity. i will reposition the whole thing and come back with some results later tonite. Thanks for all the info guys. if it still gives probs, i will post real pics of the setup, maybe that will help more. __________________ When All Else Fails, Commit Suicide