Pro/Forums - View Single Post

Anomaly2181 · 07-24-2002, 10:39 PM

Well here's the gist if you don't want to read it.

I was wondering if it is possible to extreme overclock if you are running more than 2 water blocks...1 to the cpu one to the GPU and 1 to the Mobo chip. (this is without a tec unit of anykind) It seems like alot of heat would be generated, and put into the water system....and i didn't mean to imply that im worried about case temp much....im worried about the chip temps.

---if anyone is running more than 2 WB's and is able to OC an XP processor and their graphics card well, could use your input. I'm aiming to get around a 30-40% frequency increase...like from 1.5Ghz to 1.9Ghz. More if I can.......

I also asked for alot of suggestions, but I don't want to re-list many, but here a few.....what motherboard has the 1/5 agp pci divider and is completely overclockable via the BIOS...no jumpers...

Also asked for suggestions on parts:
the resevoir-mainly a tightly sealed non leaking clear one
a pump which will maximize flow vs. pressure for any paticular setup u might suggest......and basically anything else you feel like answering......I have all the questions in the first post.

07-24-2002, 10:39 PM	#3
Anomaly2181 Cooling Neophyte Join Date: Jul 2002 Location: Arlington, TX Posts: 67	Well here's the gist if you don't want to read it. I was wondering if it is possible to extreme overclock if you are running more than 2 water blocks...1 to the cpu one to the GPU and 1 to the Mobo chip. (this is without a tec unit of anykind) It seems like alot of heat would be generated, and put into the water system....and i didn't mean to imply that im worried about case temp much....im worried about the chip temps. ---if anyone is running more than 2 WB's and is able to OC an XP processor and their graphics card well, could use your input. I'm aiming to get around a 30-40% frequency increase...like from 1.5Ghz to 1.9Ghz. More if I can....... I also asked for alot of suggestions, but I don't want to re-list many, but here a few.....what motherboard has the 1/5 agp pci divider and is completely overclockable via the BIOS...no jumpers... Also asked for suggestions on parts: the resevoir-mainly a tightly sealed non leaking clear one a pump which will maximize flow vs. pressure for any paticular setup u might suggest......and basically anything else you feel like answering......I have all the questions in the first post. __________________ I want to die peacefully in my sleep like my grandfather.....not like my family kicking and screaming in his backseat. Last edited by Anomaly2181; 07-25-2002 at 12:50 AM.