Quote:
Originally posted by unregistered
bigben2k
been done, and quite well I would observe (having tested it)
some details here
-> ask Hoot for the results
you should get out more,
whole bunches of 'the obvious' being talked to death here
google is your friend, or should become so
|
Well, that's what I'm looking for, sort of...
As for the obvious, well, that's ok: I don't spend much time out of ProCooling, so I'm kinda counting on you to keep me in touch with the rest of the world
!
(BTW did Hoot ever try his 1250 on it?)
But that's still not quite what I had in mind.
a) for a CPU cooler, I was thinking about a straight through, one channel design. No turns, no angles, no restriction whatsoever (well, maybe except for a couple of 45s in and out), except for a shallow channel and some fins. This channel would only be a bit less than twice as wide as the CPU core. Alternatively, it could have a center inlet, that splits out the sides.
b) for a pelt, the channel would have to be wider, but maybe that could be compensated by an even shallower channel.