[WebMasta33]

What I did...

Take the 4 nylon threaded screws, and put a nut about 1/4" in

Take a thin washer, and put in on the short side of the threads and push them through the front of your mobo.

Then take another set of nuts, and screw them onto the back of you mobo

Now you have the threads secured to the mobo.

Mount the Maze 3, put the springs, then thick washer, then nut.

Tighten diagonals at the same time, about 5 turns each and then go to the other diagonal.

Turn until the spring is about 3/8" long (about 90% compressed).

That's how I mounted mine.

--don't forget your ArticAlumnia--