Pro/Forums - View Single Post - Offset of new "upgrade" Danger Den Maze 2

GuyBFF · 07-26-2001, 02:43 AM

Well, I just recieved an Email from Danger Den and they say the way to tell if you have a new "upgrade" waterblock with the spiral pattern versus the maze pattern is the difference in the offset of the center fitting.

I'd appreciate a couple measurements from whoever has time so maybe we can get a basis for comparison.

Please measure the distance from the center of the inlet to the closest side. Also if you know or think it's one or the other please post.

Then we can all be assured of what type we have.

Thanks,
Guy Farquharson

07-26-2001, 02:43 AM	#1
GuyBFF Cooling Savant Join Date: Jun 2001 Location: Winnipeg, MB, CA Posts: 242	Offset of new "upgrade" Danger Den Maze 2 Well, I just recieved an Email from Danger Den and they say the way to tell if you have a new "upgrade" waterblock with the spiral pattern versus the maze pattern is the difference in the offset of the center fitting. I'd appreciate a couple measurements from whoever has time so maybe we can get a basis for comparison. Please measure the distance from the center of the inlet to the closest side. Also if you know or think it's one or the other please post. Then we can all be assured of what type we have. Thanks, Guy Farquharson __________________ A7V8X Danger Den Maze II Danner Mag Drive 350 Heater Core Style Rad Thunderbird 1400 (Soon Barton) 512mb PC2700 CL2 Promise SX4000 Raid 5 w/256mb PC133 Cache 4x40gb Western Digital 7200hdd Plus More...