I figured that there would be some water splash, which might cause bubbles to get sucked under, but compared to the "upside-down" T-inline I have now, which works pretty well and clears most bubbles out with in 10min, this one should be WORLDS better. I'm not trying to design the perfect one, just something that will be high up, and hold much more H20, plus the "fountaining" will add some eye candy to the top of the case, when I get a black light...IF, I've never really been a fan of wasting precious time and MONEY on candy, but it should function much more efficient...
The longer inlet tube Vs the short outlet was in quick hopes to separate incoming h2o w/air from the suction of the bottom outlet... It'll work fine I think... just have to get off here and get to Lowes/home depot... thanks
__________________
XP 1600+ AGOIA-Y (GreenLabel, UNLOCKED!@/ NF7-S 2.0/ PC 2700 DDR
10.5*172FSB(1806/ 1991 high), Vcore 1.792...@84.95Watts
--86' Chevette Heater Core
--1/2" Vinyl tubes
--Via1300-Stealth Mod(QUIET!)
---Home made copper-tube block
---PVC small internal res