Pro/Forums - View Single Post

jaydee · 08-09-2002, 10:59 PM

Just for an update. I doubled my GPH to rougly 60gph. Showed 0 increase or drop in temps. I also switched over to my heater core. Getting the same water temps though I I am now only using 1 120mm fan instead of two. Room temp 25.5C, water temp 30.1C, and CPU temp 38C load.

Now note my testing is based off of unscientifically advanced measurment systems! I use a 1 gallon jug and time it a few times. Also I use thermisters for the temp reading. Sorry if this is not accurate enough. This is how I based my probe accuracy.
http://www.custom-cooling.com/temptest.html

Note this was with NO air movement around the socket at that will give false reading. Also the numbers in that test are not the setup in this post.

08-09-2002, 10:59 PM	#21
jaydee Put up or Shut Up Join Date: Dec 2001 Location: Spokane WA Posts: 6,506	Just for an update. I doubled my GPH to rougly 60gph. Showed 0 increase or drop in temps. I also switched over to my heater core. Getting the same water temps though I I am now only using 1 120mm fan instead of two. Room temp 25.5C, water temp 30.1C, and CPU temp 38C load. Now note my testing is based off of unscientifically advanced measurment systems! I use a 1 gallon jug and time it a few times. Also I use thermisters for the temp reading. Sorry if this is not accurate enough. This is how I based my probe accuracy. http://www.custom-cooling.com/temptest.html Note this was with NO air movement around the socket at that will give false reading. Also the numbers in that test are not the setup in this post.