Pro/Forums - View Single Post

koslov · 08-12-2002, 03:01 PM

Here's just an idea you can modify/copy, but if it turns out good, you have to send me one.

You would have (2) 1/2" inlets on the sides and a 5/8" outlet in the middle. Base would probably have to be pretty thin, like 3mm, since I tried to optimize the design for high flow. I was thinking perhaps 50mm by 80mm, I know it isn't proportioned right in the pic, but I'm sure you can adjust it. Channel 7mm deep with a 4mm Lucite top. Gotta go c-thru.

Your probably going to need to design your WB in CAD, then convert to a CNC prog.

If you can't do that, your best bet would be to license someone's CAD design.

08-12-2002, 03:01 PM	#8
koslov Cooling Savant Join Date: Jul 2002 Location: Posts: 264	Here's just an idea you can modify/copy, but if it turns out good, you have to send me one. You would have (2) 1/2" inlets on the sides and a 5/8" outlet in the middle. Base would probably have to be pretty thin, like 3mm, since I tried to optimize the design for high flow. I was thinking perhaps 50mm by 80mm, I know it isn't proportioned right in the pic, but I'm sure you can adjust it. Channel 7mm deep with a 4mm Lucite top. Gotta go c-thru. Your probably going to need to design your WB in CAD, then convert to a CNC prog. If you can't do that, your best bet would be to license someone's CAD design.