Data I have seen suggests that all labyrinthe type (maze) blocks perform pretty much the same for a given flow rate. Some appear to perform better than others in one's system due to differences in flow restriction. Not some marvel of thermodynamics, it is the fact that there is very little heat spreading from an AMD core coupled by the center inlet where cool water enters.
decoded: Swiftech puts considerable R&D into their blocks. If that is a design criteria then consider the MXW462-U. I am guessing Innovatek has some engineers that are on staff or are being consulted.
The single feature I would like to see waterblock and radiator manufacturers include is pressure drop vs flow rate. A DPT setup and a flow meter isn't THAT expensive, and it would be very helpful in putting together systems. Similar to the P-Q curves for fans or pumps that are available from the manufacturer typically.
|