Quote:
Originally posted by koslov
Here's just an idea you can modify/copy, but if it turns out good, you have to send me one.
You would have (2) 1/2" inlets on the sides and a 5/8" outlet in the middle. Base would probably have to be pretty thin, like 3mm, since I tried to optimize the design for high flow. I was thinking perhaps 50mm by 80mm, I know it isn't proportioned right in the pic, but I'm sure you can adjust it. Channel 7mm deep with a 4mm Lucite top. Gotta go c-thru.
Your probably going to need to design your WB in CAD, then convert to a CNC prog.
If you can't do that, your best bet would be to license someone's CAD design.
|
If you give me a little more (specific) info, I can probably create a CAD model for this in a day or two. I can also create cutter path for it given some basic parameters. Anyone interested?
Bob