how I did it
Here is how I have tried to install nt:
1. I took the 1gb wdc harddrive and plugged it to my mainframe. There I used the winxp format tool to format the harddrive to a fat 16 drive.
2. I plugged back the harddrive to the server and booted up with a winme disc and choosed to boot with cd-rom support but not to start the install prog.
3. Then I typed E:\i386\winnt.exe /x /b /s e:\i386\
4. The prog. started and copied the files needed before the setup prog. can continue. When the copy was finished it asked me to reboot which I did.
5. "Press Any Button To Reboot" (I have configed so my bios starts to boot from Cd-rom, then C:\)
|