[Crappy]

That blue thing in the back is a wire going to my Ultraviolet Cold Cathode light.It was just the right size to fit in between the 2 80mm Panaflo and the side of the case.

As for the powercord from the pump, I'm going to make a plug in the back of the case so I can close the side.

I know from the pic it don't look like I have much room to get to the PCI slots, but I am able to remove and put back the cards without moving the pump or sliding out the tray.

All fans in the case are Panaflo fans
(2)80mm blowing out in the back
(2)80mm pulling air in and feeding the rad.
(1)120mm pulling from the rad and moving air around the case.

I still have some more work to do on it and I'm waiting for my DDMaze2 to come in. So will see if that help me some more with temps.