Quote:
Originally posted by jaydee116
They are not connected because I belive they intended a center outlet and to side inlets or center inlet and 2 side outlets. If that is the case this would fail miserably. But if they do connect the middle fins all the way through it may not be so bad as long as the outlet/inlet where huge.
Also V12 that program is roughly $3,000 so you may want to look for an alternative. I do ALL my designing and CAM routing with ACAD2000. Works pretty good with my desktop CNC as it doesn't like the bigger mills GNC code very much.
|
The way it is set up now is with a 5/8" center inlet and 2 x 1/2" side outlets. Just a guess on my part as to the intention of the original design.
If anyone has any other ideas they want rendered into CAD data, just give me a jingle,
and I'll give it a shot.
As I stated before, I am also willing to do some NC Programming if that is needed. I guess I am spoiled by the tools I have available to me. Long live R & D departments!
Bob