80w Peltier on my GF4--Condensation problem
I'm very close to finishing my first loop of my watercooled peltier system, its running on the floor right now. I hope this poor quality pic gets in the thread somewhere; no clue how to attach it properly
I cant detect any significant condensation anywhere but the AGP Connector leads. These get pretty cold and wet. I want to eliminate all condensation before i put it in. If there isnt any w/o a heat load there wont be any in my case, right?
My plan to solve the condensation is to simply load the AGP slot with Dielectric grease, will this be enough?
Also if anyone has a better GF4 Ti4400 mod page besides the one at Xbitlabs pls let me know...i want to take the core voltage to about 1.95.
__________________
Working on water cooled peltier system with two transmition coolers and two pumps in an acrylic res. 226w Peltier for my P4, and 80w on my GF4 Ti4400.
Also installing a 80 cent brass waterblock on my IT7 Max's northbridge. (its a 3/8" elbow fitting lapped)
|