Pro/Forums - View Single Post

nemaste · 08-16-2002, 09:42 AM

i'm 100% sure it'll work. i used to run my Delta 80mm & 92mm screamers on my DD5 with 0 issues. if i remember correctly, the 92mm is rated at a hefty 1.5A (or 18W per channel), so your tornados won't come close to overloading it.

[edit]
BTW, the Digidoc can carry 1.5A on EACH channel. this makes the actual collective rating at 18Wx8=144W total. i'd excercise caution however, since the supply lines too small to carry that load without heating. as long as you don't go over 18W on any one channel, you should be fine. (so don't hook both tornadoes to one channel). in my setup i had the 2 Deltas (separate channels), 5 normal 80mm fans (2 pairs in parallel, 1 with a separate channel), 2 120mm Mech fans (1A @ on separate channels), & the built in 40mm Sunon running together on my DD5. that took up all 8 channels.

08-16-2002, 09:42 AM	#3
nemaste Cooling Neophyte Join Date: May 2002 Location: CA Posts: 78	i'm 100% sure it'll work. i used to run my Delta 80mm & 92mm screamers on my DD5 with 0 issues. if i remember correctly, the 92mm is rated at a hefty 1.5A (or 18W per channel), so your tornados won't come close to overloading it. [edit] BTW, the Digidoc can carry 1.5A on EACH channel. this makes the actual collective rating at 18Wx8=144W total. i'd excercise caution however, since the supply lines too small to carry that load without heating. as long as you don't go over 18W on any one channel, you should be fine. (so don't hook both tornadoes to one channel). in my setup i had the 2 Deltas (separate channels), 5 normal 80mm fans (2 pairs in parallel, 1 with a separate channel), 2 120mm Mech fans (1A @ on separate channels), & the built in 40mm Sunon running together on my DD5. that took up all 8 channels. __________________ StrongShockModz Last edited by nemaste; 08-16-2002 at 09:49 AM.