Pro/Forums - View Single Post

|PuNiSh3R| · 08-18-2002, 10:02 AM

Get a heatercore and a good 500GPH or better pump.

If you water chill this later.. with more PC's.. you are going to need a fierce compressor in that sucker.. that's if you go with phase change water chiller.. A 1/2HP compressor to do a bunch of machines.. and do it good.

In my opinion.. you should get 2 via aqua 1300's.. Be about 40 dollars.. Use them in a dual pump setup..

If you use a reservoir.. you could have the one pump push water threw the system and the other suck it.. heh.. so do like this

One pump pushes the water through and when your water line comes back into the reservoir.. plug it into the inlet of the 2nd pump.. if you see what i mean.. You could have a really kick ass closed system by having the outlet of the first pump.. pump water through the system.. then the return water line would get plugged into the inlet of the 2nd pump and then the outlet of the 2nd pump would get put into the inlet of the 1st pump.. kinda confusing but it would give you a seriously huge head pressure.. You'd have a really good flow rate.

08-18-2002, 10:02 AM	#2
\|PuNiSh3R\| Foo's Been Banned Join Date: May 2002 Location: Pennsyltucky Posts: 255	Get a heatercore and a good 500GPH or better pump. If you water chill this later.. with more PC's.. you are going to need a fierce compressor in that sucker.. that's if you go with phase change water chiller.. A 1/2HP compressor to do a bunch of machines.. and do it good. In my opinion.. you should get 2 via aqua 1300's.. Be about 40 dollars.. Use them in a dual pump setup.. If you use a reservoir.. you could have the one pump push water threw the system and the other suck it.. heh.. so do like this One pump pushes the water through and when your water line comes back into the reservoir.. plug it into the inlet of the 2nd pump.. if you see what i mean.. You could have a really kick ass closed system by having the outlet of the first pump.. pump water through the system.. then the return water line would get plugged into the inlet of the 2nd pump and then the outlet of the 2nd pump would get put into the inlet of the 1st pump.. kinda confusing but it would give you a seriously huge head pressure.. You'd have a really good flow rate. Last edited by \|PuNiSh3R\|; 08-18-2002 at 10:10 AM.