well here it is, so far been running two weeks now.i would have been back sooner but new girlfriend taking up alot of my time.but cooler is running a iwill xp333 with a xp2100@2150mhz @1.82volts.load is -38 to -42 all the time.unloaded at idle -46.
running so cold i now have a problem being too cold .the processor seems to lose my l2 cache if i dont start up the pc and the cooler at the same time so the cpu isnt so cold at startup.in 30 seconds it will take my cpu down to -30.if i startup the cooler and computer at the same time when i reach the desktop i am already showing -20 in motherboard monitor and -38 or so on the face of the evaporator.motherboard monitor seems to be limited to -20c reading because i never show any colder temps and my loads only get to -16 or so shown on the desktop by motherboard monitor.
__________________
xp2800barton@2712 226x12 dual bank 2x256 twinmos pc3200 8RDA epox full mods.vdd,vdimm,vcore.
custom r502 cooled unit.CPU running @-18C GPU -21C Chipset -20c
only one like it.in one case.
custom r502 cooling unit
3D2001SE 21315
3DMARK03 6659
|