Pro/Forums - View Single Post

Can O' Beans · 08-21-2002, 02:10 AM

Well, I think I'm gonna go all-out-insane & do a dual pump/dual loop system.

Loop1 will be a 500gph Danner feeding a homemade high-flow water block. Pump -> Block -> Rad

Loop2 will be either 250 or 500gph Danner(probably the 500) feeding GF4 -> Chipset -> RAM

-> PSU -> Flow sensor/indicator -> HD -> Rad.

_
Basically: (ignore periods for spacing)

Pump1 -> Loop1 -\................/-> Pump1
...........................>Radiator<
Pump2 -> Loop2 -/................\-> Pump2

90% sure there will be a back-lit plexi waterwindow/res in there too, will sit behind my Dragon cutout..., Two systems could dump into the res then into rad. I might put the GF4 into the first system loop though...

Rad is an Escort Heatercore, about 6"x8"x2" core or so, shrouded with fans on both sides.

I'll be getting the new Soyo P4X400 DRAGON Ultra P4 board with a 1.6A P4 or 1.8A P4 at the least, OC'ed as far as it will go.

Can anyone tell me if this HC will handle all this?

08-21-2002, 02:10 AM	#1
Can O' Beans Cooling Savant Join Date: Aug 2002 Location: Pa - USA Posts: 264	Two pumps into one HC... Well, I think I'm gonna go all-out-insane & do a dual pump/dual loop system. Loop1 will be a 500gph Danner feeding a homemade high-flow water block. Pump -> Block -> Rad Loop2 will be either 250 or 500gph Danner(probably the 500) feeding GF4 -> Chipset -> RAM -> PSU -> Flow sensor/indicator -> HD -> Rad. _ Basically: (ignore periods for spacing) Pump1 -> Loop1 -\................/-> Pump1 ...........................>Radiator< Pump2 -> Loop2 -/................\-> Pump2 90% sure there will be a back-lit plexi waterwindow/res in there too, will sit behind my Dragon cutout..., Two systems could dump into the res then into rad. I might put the GF4 into the first system loop though... Rad is an Escort Heatercore, about 6"x8"x2" core or so, shrouded with fans on both sides. I'll be getting the new Soyo P4X400 DRAGON Ultra P4 board with a 1.6A P4 or 1.8A P4 at the least, OC'ed as far as it will go. Can anyone tell me if this HC will handle all this?