I have a 226 watt pelt from the "Danger Den" and their PSU which they say should be perfect for the pelt. I do know that powering pelts @ 75% to 80% is where life begins (pardon the stupid phrase) the pelt is rated @ 226 watts, 15.2 v max and 24 amps. Now it is my understanding that pelts will take as much as they need or can get to work at their best performance, ( I don't know where I read this but I did ). The volts are adjustable up or down to a slight degree. Should I set them for the 12v and leave it at that or what are your suggestions. Thanks,
cmfic (John )
PS. The hot side will be cooled by #ROTO's "Big Brother" chiller which kickes ass. I am using the Danger Den Maze-2 block on a XP 1900+. If I could afford it I would freeze this chip to absolute 0 which is -273' Kelvin(spelling) sorry. With my current setup I beleive I can hit a -30'c on the core. Please correct me if I am wrong. Thanks again,
cmfic (john)
