Quote:
Originally posted by maskedgeek
you didnt see my popcan al vs cu thing did you? there was 1c diff, used a maxijet 1200 thats 295gph at head, and about 100 going thru the block...
|
So you're Jon...
You know, that's the only homemade gettho block I've seen that actually works well. Congrats!
In the article, you didn't specify the thickness of the Alu and Cu. The 3 deg C difference is a comparison of Al and Cu ALL THINGS BEING EQUAL, so for the same thickness. Was this the case?
From the threads, I can see that you used 1/8 in. thick copper (that's 3mm).