Pro/Forums - View Single Post - Proud owner of new EMCO mill, need some US help

morphling1 · 08-29-2002, 04:27 AM

another 800$ were precision machine vise, and then collet $ chuck set from 2 to 16mm, and set of milling bits. This will be probably cheaper in US but at least the quality of my part is very good.
Ok so I won't look into less then 200oz steppers, and those powermax looks strong enough, btw they also sell 248 oz. ones all with dual shafts, so I can still put hand wheels on one side.

EDIT: I use wrong currency conversion, so the correct prices would be 1700 $ for mill and 600$ for accesories.

08-29-2002, 04:27 AM	#22
morphling1 Cooling Savant Join Date: Sep 2001 Location: Slovenia Posts: 468	another 800$ were precision machine vise, and then collet $ chuck set from 2 to 16mm, and set of milling bits. This will be probably cheaper in US but at least the quality of my part is very good. Ok so I won't look into less then 200oz steppers, and those powermax looks strong enough, btw they also sell 248 oz. ones all with dual shafts, so I can still put hand wheels on one side. EDIT: I use wrong currency conversion, so the correct prices would be 1700 $ for mill and 600$ for accesories. __________________ [My ftp, with lots of pics, hope to be home page someday Last edited by morphling1; 08-29-2002 at 05:59 AM.