Ok, you have 4 wires on the molex from the PS
yellow +12v -- ground -- ground -- red +5v
from the molex you have on the fan you have
red +12v -- ground -- blank -- blank
if you take the ground wire and move it to hook into the red+5 volt, you'll have a 7volt fan.
I'm currently running two 12volt Panflows at 5 volts, which is you just move the 12v line to the 5volt.
__________________
==========
--Soyo KT333 DRAGON Ultra (Platinum Edition)
--AMD 1.4 @ 1.54 (11x)
--768mb of PC2100 (@140FSB)
--Asus v8200 GeForce3 @ 210/490
--Maxtor 40gb Quiet + 2 IBM 40gb 60GXPs (removable) + 8gb WD
--Audigy
--Maze 3, DD Gf3 block, 2x BIX, Eheim1250
===========
|