Pro/Forums - View Single Post

jamicon · 09-01-2002, 06:35 AM

I recently got the copper for my block milled at a local CNC machiner. unfortunately the thickness i wanted for the block was not availiable, so i went for a thicker size. This has left my block with a 11mm thick base( 11mm of copper between the CPU and the bottom of the channel).

I am going to be cooling a p4 with it.

will it affect performance by having such a thick base, or should i get it made thiner. And if so, how?

here is a pic of the channel design (the block is the size of the P4 stock cooler)

thanks

09-01-2002, 06:35 AM	#1
jamicon Cooling Neophyte Join Date: Aug 2002 Location: Australia Posts: 44	is the base of my block too thick? I recently got the copper for my block milled at a local CNC machiner. unfortunately the thickness i wanted for the block was not availiable, so i went for a thicker size. This has left my block with a 11mm thick base( 11mm of copper between the CPU and the bottom of the channel). I am going to be cooling a p4 with it. will it affect performance by having such a thick base, or should i get it made thiner. And if so, how? here is a pic of the channel design (the block is the size of the P4 stock cooler) thanks