Or you could use spacers between teh board and the mobo backing plate/tray, that way it will stiffen the board. I work in an assembly house (Automated SMT electronics assy., as a process eng.) and I can tell you for sure that you don't want the board flexing. solder joints can crack very easily, and you will never know it...you will just have an unexplicable problem (probably intermittant) and blame it on the board.
__________________
1.4G AHYJA-Y @ 1.6G with H2O system. Ehime 1060, LiquidCool leviathan, Spir@l Block, all 1/2"
It will post at 1725, that is where I want it to be stable....
|