Pro/Forums - View Single Post

Brad · 09-07-2002, 04:20 PM

I've had 'ntldr' is missing due to overclocking a little bit too high, once I dropped down a couple of mhz it all went back to perfect.

another way to see if it is ram or cpu that is limiting you is to adjust your ram timings slightly, to see if the instability gets worse or doesn't change. with your ocz stuff, I'm willing to bet your machine will running into ram problems first

09-07-2002, 04:20 PM	#39
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	I've had 'ntldr' is missing due to overclocking a little bit too high, once I dropped down a couple of mhz it all went back to perfect. another way to see if it is ram or cpu that is limiting you is to adjust your ram timings slightly, to see if the instability gets worse or doesn't change. with your ocz stuff, I'm willing to bet your machine will running into ram problems first __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water