Pro/Forums - View Single Post

hmale · 09-09-2002, 02:51 PM

Most additives like Water Wetter are surffactants and as such will foam.

I have found that if you have a fill tube or air trap you will be able to elimimate the foaming and air out of the system. The time it takes varies depending on your individual design. In my case I experienced the same and it took better than 24 hours of continuous running before all the air/foam was eliminated from the circuit.

Hope this helps...
Cheers!

09-09-2002, 02:51 PM	#5
hmale Cooling Savant Join Date: Aug 2001 Location: MIami, Florida Posts: 169	Most additives like Water Wetter are surffactants and as such will foam. I have found that if you have a fill tube or air trap you will be able to elimimate the foaming and air out of the system. The time it takes varies depending on your individual design. In my case I experienced the same and it took better than 24 hours of continuous running before all the air/foam was eliminated from the circuit. Hope this helps... Cheers!