Pro/Forums - View Single Post - Swapped an Eheim 1048 for a Eheim 1250, Interesting results!

nikhsub1 · 09-09-2002, 07:14 PM

Well as the topic says, I switched my pump to an Eheim 1250 from the 1048. The rest of my system is in my sig. So far, higher flow don't mean jack! I am actually seeing higher temps, about 3C. Of course the system is not 100% bled, probably 95% and the AS3 will need time to settle. With the 1048 temps were 41-42C load (on die reading) with a case temp of 26C. With the 1250 and the SAME case temp I load at 45-46C. The D-Tek Spir@l is a high flow block too (I think

) What do you think? Here is how my system is set up:

Here is a pic of where the pump is, this is BEFORE the rad/shroud re-do:

09-09-2002, 07:14 PM	#1
nikhsub1 c00ling p00n Join Date: Jun 2002 Location: L.A. Posts: 758	Swapped an Eheim 1048 for a Eheim 1250, Interesting results! Well as the topic says, I switched my pump to an Eheim 1250 from the 1048. The rest of my system is in my sig. So far, higher flow don't mean jack! I am actually seeing higher temps, about 3C. Of course the system is not 100% bled, probably 95% and the AS3 will need time to settle. With the 1048 temps were 41-42C load (on die reading) with a case temp of 26C. With the 1250 and the SAME case temp I load at 45-46C. The D-Tek Spir@l is a high flow block too (I think ) What do you think? Here is how my system is set up: Here is a pic of where the pump is, this is BEFORE the rad/shroud re-do: __________________ :-.,_,.-:'``':-.,_,.-:'``':-.,_,.-:'``':-.,_,.-:'``':-.,_,.-: E6700 @ 3.65Ghz / P5W DH Deluxe / 2GB 667 TeamGroup / 1900XTX PC Power & Cooling Turbo 510 Deluxe Mountain Mods U2-UFO Cube Storm G5 --> MP-01 --> PA 120.3 --> 2x DDC Ultras in Series --> Custom Clear Res "Artificial intelligence is no match for natural stupidity." 1,223,460+ Ghz Folding@Home aNonForums :-.,_,.-:'``':-.,_,.-:'``':-.,_,.-:'``':-.,_,.-:'``':-.,_,.-: