Quote:
Originally posted by bigben2k
Kevin tried it, but I think he forgot to clamp the thing (only used 2 nylon bolts)... then OnDa posted an article on the same day, about the importance of clamping (kinda ironic).
Nice work on the chiller wymjym. Got temps?
BladeRunner: what is "T-Cut"? Welcome back!
|
Hi,
I have the sandwich pulled together with steel screws and junction blocks, so there is quite a bit of pressure.
on a typical day,
ambient air is 30.5(c)
water res temp is 21.9~22.4 (understand that I can adjust it colder but I found that if I set it to operate at just 1 degree cooler I start to see some condensation on humid days....so I set the controller to keep the cooled water this much cooler than ambient air...if the air temp drops then the controller drops the water temp by the same amount...always at a temp just above the point of condensation)
cpu temp (mobo thermistor) is idle 31.6
under working load temp is 33~35
under full blown everything 35~36 @ 24 water temp
Bladerunner...........I realized that YOU are my hero. Several months ago I saw a pix or two of your work and just filed it to the back of my mind. So...you inspired me to make it shiny, thanks.
wj