Pro/Forums - View Single Post

Joe · 08-06-2001, 11:49 AM

I have 2 swissflow meters, and they are SLICK AS SHIT. you need to do some math to get the correct flow numbers ( as it registers at 16,000+ RPM on mbm ( so you divide it by 6000 to get Liters per min, multiply x2 to compensate for the /2 divider the header uses for all fans, and then you can convert to Gal, and x60 to get what the GPH is.)

they are small, leak proof, and Super easy to use.

08-06-2001, 11:49 AM	#18
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	I have 2 swissflow meters, and they are SLICK AS SHIT. you need to do some math to get the correct flow numbers ( as it registers at 16,000+ RPM on mbm ( so you divide it by 6000 to get Liters per min, multiply x2 to compensate for the /2 divider the header uses for all fans, and then you can convert to Gal, and x60 to get what the GPH is.) they are small, leak proof, and Super easy to use. __________________ Joe - I only take this hat off for one thing... ProCooling archive curator and dusty skeleton.