Quote:
Originally posted by Darkhorse:
Racer,
I picked up the flow indicator from RS Componenets. My end goal is to fit some sort of IR transmitter/reciever to give a RPM indication and since the casing is transparent on both sides I should be able to do this without breaking any water tight seals.
|
Ahhhh....Good call, if you could get a fast enough sensor it could count the vains on the indicator, which could then be fed into MBM....the only problem is that it would be tough to corelate to real-world flow (GPM/LPM), but would indicate rise or drop in flow very easily...
/me starts rummaging through spare parts cabinets at work....
__________________
1.4G AHYJA-Y @ 1.6G with H2O system. Ehime 1060, LiquidCool leviathan, Spir@l Block, all 1/2"
It will post at 1725, that is where I want it to be stable....
|