Ahhh, both very good ideas! Thank you very much. =P
As for the 2 fans, I am building a shroud that will somewhat resemble a funnel, with the rad at the 'bottom' and with the 2 fans sucking from the top, I thought a little negative pressure would do good for cooling (please correct me if im wrong) this shroud is going to be as air-tight as I can make it. Also while im on the subject, for the other side of the rad I was planning on using a tube/duct to bring in ambient air from outside the case. Im also deciding if adding a fan to draw the cool air into the duct would be overkill or not with the cooling properties of the BI extreme... At least if I use too much I can throttle them back a bit and have a quieter setup...
I appreciate your opinions!
kem
__________________
-kem
WinXP | xp1500 @ 1.59ghz | Iwill xp333-r rev2.1 | 2X256 Kingston pc2700 | Radeon 8500 retail | 431W Enermax Whisper | 2x 40gig Maxtor 133's in RAID 0 |
**Cooling** | DD Maze2-1 | DD Chipset Block | 1/2" ID hose and fittings | ehiem 1250 | BIX shrouded to a 172mm 200+cfm Rotron Monster | DD5 | Custom inline Res |
|