Pro/Forums - View Single Post - Proud owner of new EMCO mill, need some US help

morphling1 · 09-19-2002, 12:31 PM

Spindels are 14 mm in diameter and the shaft on the stepper is 6.2 mm . And for connecting I intend to make coupling on lathe, so on one side 14mm ID hole, and on the other 6.2mm then srew with three bolts at 120° radial to each shaft.

09-19-2002, 12:31 PM	#42
morphling1 Cooling Savant Join Date: Sep 2001 Location: Slovenia Posts: 468	Spindels are 14 mm in diameter and the shaft on the stepper is 6.2 mm . And for connecting I intend to make coupling on lathe, so on one side 14mm ID hole, and on the other 6.2mm then srew with three bolts at 120° radial to each shaft. __________________ [My ftp, with lots of pics, hope to be home page someday