Pro/Forums - View Single Post - Will the maze 3 work for me? (fitting issue)

icel0rd · 09-20-2002, 03:12 PM

Hey gang, I wound up getting a Gigabyte GA-7DPXDW+ (or -p) board and I noticed that the barrage of capacitors around the CPU sockets are kind of close to the stock HSFs. I'm wondering if this block is going to fit over the socket without hitting the capacitors.

If that block is considerably wider than the stock HSF, then I can't see it working out. They looked a little larger than stock HSFs and rectangular.

Anyway, here is the mobo I'm talking about getting blocks for:

http://www.zdnet.de/techexpert/artik...mpx_16-wc.html

What do you guys think ?

Ice

09-20-2002, 03:12 PM	#1
icel0rd Cooling Savant Join Date: Jan 2002 Location: Where even the devil wont go Posts: 103	Will the maze 3 work for me? (fitting issue) Hey gang, I wound up getting a Gigabyte GA-7DPXDW+ (or -p) board and I noticed that the barrage of capacitors around the CPU sockets are kind of close to the stock HSFs. I'm wondering if this block is going to fit over the socket without hitting the capacitors. If that block is considerably wider than the stock HSF, then I can't see it working out. They looked a little larger than stock HSFs and rectangular. Anyway, here is the mobo I'm talking about getting blocks for: http://www.zdnet.de/techexpert/artik...mpx_16-wc.html What do you guys think ? Ice __________________ Redhat 8 Gigabyte GA-7dpxdw+ w/dual modded AXP 1800+ CPUs running at AXP 2000+ speed 1 512 meg crucial ECC DDR 2100 1 512 meg Infineon PC2700 Sblive Value Geforce 4 Ti4600 Deskstar 60 gig drive (1)K4.1 waterblock (.5" barbs) (1) Maze 3 waterblock (.5" barbs) Black Ice Rad TopFin 250gph pump 1/2" OD Vinyl hose (yep, vinyl)