I'm giving those 8 blocks finnish (they will be sold as a pre-relase), here's what I'm doing for further performance testing:
- 1 block with wall thickness reduced to +-2mm, not the internal divisions just the outside walls, bottom is "regular" thickness. Normal wall thickness for the sides is 3.8mm.
- 1 block with bottom wall thickness reduced to 2.5mm. Normal bottom thickness is 3.5mm
- 1 block with height reduced (as in some of the top shaved off) to <I'm not sure exactly how much for as I still didn't do this one>
- 1 block with the water inlet right above the CPU core, this one will have 2 water outlets, one on each side
The other 4 are "regulars", the last one I mentioned will have only it's top modded so it can also be "converted to a regular" just by switching tops.
As soon as I'm done making these blocks/mods I just described (don't forget I still have to cast the tops) I will have some extensive performance (Cº/W) data
Thanks
Bruno Facca
|