If you can't find one, then make one up. I did that on my 1048.
Get a 3/8" to 1/4" Bushing and a 1/4"x 1 1/2" brass nipple. The 1/4" nipple OD is the same size as a 1/2" barb fitting and will fit a 1/2" hose.
__________________
AMD XP 1900+@1680 1.75V
CPU Temps 28c Idle 38c Load
Case Temps 24c to 26c
DD MAZE2 Block 1/2"
Black Ice Xtreme
Panaflo 120mm 86 cfm
Eheim 1048 Pump with 1/2" hose
Abit KR7A Motherboard (Non-Raid)
256mb Kingmax PC-2700
IBM 20gig ATA66 Hard Drive
Plextor 24/10/40 CD-RW & Sony 16x DVD-Rom
Gainward GeForce 3 Ti200 64MB (250/575) 3.8ns mem
Sound Blaster Audigy
Linksys 10/100 network card
|